A concrete stone wall in the garden can be bricked up in the classic way or created using drywall. Function, size and height are decisive factors. In drywall construction, the stones are simply "stacked". The wall is built up with mortar. The gluing method is a kind of hybrid of the two classic designs.
Wall types and their typical functions
There are many different types and functions that a concrete block wall performs in the garden. The following types of use are common:
- Also read - Design and statics of a concrete wall in the garden
- Also read - Planning and building a concrete block wall
- Also read - The variants of the concrete block wall
- Embankment reinforcement
- Free space fastening
- Garden edging or enclosure
- Raised bed edging
- Sunken garden attachment
- Privacy screen
- Stair flanks
- Path limitation
- Ornamental wall
In general, a concrete block wall can be built by stacking it loosely in drywall, traditionally walled up with mortar (7.79 € at Amazon *) or the stones can be completely or partially glued.
Structural requirements, fastening and dimensioning
As a first rough planning factor, the rule of thumb should be observed that walls with a height of one meter can begin to fall over. However, the dimension plays an important role here. If the concrete blocks or cuboids are about thirty centimeters thick, their own weight ensures a good hold.
All concrete stone walls in the garden, the same type, is mean that they have to stand on a stable and unbelievingly founded foundation. The foundation must be founded frost-proof. When building the concrete block wall, the water volume must be calculated around you.
Must prevent stows "behind " of the wall and flushing and underflowing the environment of the foundation. Corresponding drainages keep too much water away from the wall and their attachment. The water disposal can require adequate measures to set bumps as spelling openings and the laying of pipes.
Special forms of construction
Instead of a pure dry building, the concrete wall stones can be fixed when stacking with special concrete adhesives. The stop does not paint right, but is more stable than loose stacks.
If walls are backfilled, as is the case with embankment boundaries and walls in a sunken garden, partial gluing can be used if the stones are otherwise of sufficient width and size for drywall. To secure, at least the last row of stones from which the wall crown is made is glued.Tips & Tricks If you prefer drywall, you can create a stable base for hollow blocks with metal rods in the foundation as reinforcement. During or after stacking, the cavities can also be filled with earth, sand or cement.