Glasses are fogged up? This is how it becomes clear

When the glasses come out of the dishwasher milky or misty, many people think of lime first. A defect in the dishwasher is also often considered. Even if you use a good detergent, the glasses won't clear again. Here we show you why and how you can get your glasses shiny and clear again.

Reasons for fogged glasses

Basically there are only three reasons why a glass can be fogged up or milky when it comes back from the dishwasher. The cloudiness is seldom caused by limescale, more often by residues of dishwasher tablets or dirty drain filters.

  • Also read - glasses become milky - this is how they become clear again!
  • Also read - sterilizing jars - aseptic jars
  • Also read - Remove jar labels
  • Dishwashing detergent residue
  • clogged and dirty drains and drain filters
  • hard water / lime

Clean fogged glasses step by step

  • citric acid
  • vinegar
  • Dishwashing liquid
  • Microfiber cloth
  • Tea towel

1. Souring

For all three problems through which their glasses can become milky, lemon acid or vinegar essence are suitable. Depending on how big the proportion of the lime is responsible for the mist, the longer the glasses must be bathed in the acid.

2. Rinse

After the glasses were bathed in citric acid, they come again in normal lukewarm rinsing water with a little dishwashing detergent. Wipe the glasses thoroughly with a microfiber cloth in the water.

3. water

Then the glasses are rinsed again with clear and cold water. It is important that you use cold water.

4. Dry

So that does not arise immediately again water spots on the glasses, the glasses are dried with a lint-free tea towel made of cotton and polished. Especially in the kitchen, the glasses should then be stored in a closed cupboard so that the greasy steam does not settle on the glasses.

Tips & Tricks Lead crystal glasses turn milky when the water is too hot. Therefore, these glasses should not be put in the dishwasher. Even when hand washing lead crystal glasses, it is important not to use water that is too warm. Should a lead crystal glass turn milky, it is repeatedly bathed in clear, cold water. In many cases the damage can be repaired in this way.