Clean granite tiles professionally

Granite is a hard stone, but it is porous. Therefore, when cleaning granite tiles and slabs, some special aspects must also be taken into account. In the following we will inform you about the requirements and special features for the professional cleaning of granite tiles and granite slabs.

Granite has many interesting properties

Granite is a popular natural stone and is used in many ways in house construction. Many granite stones are acid-proof, but also heat-resistant and cut-resistant. As a floor covering, granite is just as popular as its use as worktop and vanity top. This means primarily the use of granite slabs and tiles where there is a high level of stress.

  • Also read - polishing granite tiles professionally and successfully
  • Also read - Cutting Granite Tiles Neatly
  • Also read - Granite tiles remaining stock: this is how you can get cheap granite tiles

This is of course accompanied by a particularly frequent need to clean the granite tiles and slabs. However, it is strongly recommended that you take the properties of granite into account and carefully select the resulting cleaning agents for cleaning granite tiles. It starts with the first basic cleaning after laying the granite tiles and slabs.

Since granite is porous, the stone must also be impregnated for cleaning

Granite is open-pored. This means that dirt particles as well as liquids can easily penetrate the stone. So after the thorough cleaning, the impregnation of the granite tiles is of enormous importance. But you must definitely wait until the granite has completely dried out before impregnating. This can be two to three months after installation.

Iron particles are also included in the granite. If the granite had not yet dried out, but had already been impregnated, this would not only protect against the penetration of liquids and particles, but also prevent the water still stored in the stone from evaporating. As a result, unsightly rust stains can form in the granite tiles and slabs. They can hardly be removed, if at all.

Maintaining granite tiles: initial cleaning, impregnation and everyday cleaning

After laying granite tiles and slabs, you should first carry out an intensive thorough cleaning with suitable cleaning agents. In addition to special products offered by specialist retailers, you can also use ammonia as an alternative. Now you have to wait until the granite slabs or tiles have completely dried out. Then you can seal the tiles or slabs.

Here, too, the trade offers special products; hard waxes and hard oils are particularly suitable. After you have impregnated your granite flooring accordingly, you can clean it without hesitation. The cleaning agents for granite tiles and slabs are often also a polish, which means that regular cleaning of the granite not only gives it its shine - you can increase the shine to breathtaking brilliance.

With patience, you will have optically unique granite tiles and slabs for a lifetime

However, it is essential to observe the manufacturer's information, especially regarding the impregnation that you are using. In conjunction with the everyday use, you must not forget to impregnate the granite again at the appropriate intervals. If, for example, grease penetrates the granite with granite countertops as a kitchen worktop, you hardly have a chance of getting this grease out of the stone again.

At least not in the short term - that can take several years! Therefore, the two or three months that you have to wait after laying the granite tiles are not really in an impracticable relation to the many years it would take for cooking oils or fats to dissolve from the granite again. Patience also pays off, because the granite tiles or slabs will become more and more beautiful over the years if you treat and care for them properly.

Tips & Tricks Especially for granite there are also deep gloss products that create a breathtaking wet effect. However, you can only use these products on highly absorbent granite. A granite polished by the stonemason, for example, would be excluded. On the other hand, flamed, natural rough or appropriately ground granite surfaces are suitable.

In addition to its basic properties, granite also impresses with its variety of colors, which can range from light gray to yellow and red to dark blue and brown. Often, mica is also included in the granite, which, with appropriate lighting, creates a particularly elegant granite.

To determine the degree of moisture in the granite, you can use special measuring devices, which, however, become more and more expensive with increasing reliability. Alternatively, you can or. observe the regression of dark spots on the granite tiles and slabs.

",