The cleaning of granite depends, of course, on the type of pollution. The usual and regular maintenance cleaning can be carried out with a special granite cleaner. There are both ready-made products and home remedies for stains and soiling of various origins.
Types of pollution
The soiling of granite slabs can be divided into three groups of causes. Frequent causes, especially indoors, are fatty substances, oils and wax. They are difficult to clean and not always leaving any residue. The spots are mostly drawn into the porous surface and penetrated relatively deep. Special absorbent agents can, at least partially, absorb the substances. For fresh stains, the home remedy damp salt can help prevent further penetration by absorbing the moisture.
- Also Read - Cleaning Granite Countertops
- Also read - How to lay granite slabs on gravel
- Also Read - Proper Care of Granite Slabs
Especially in the outdoor area, the granite slabs are soiled by plants and pollutants in the air. They can range from loose dust to the formation of green cover and lichen-like, moss cover. Dishwasher detergents are often sufficient for lighter soiling. Special green deposits or algae removers clean stubborn infestation. The cleaning of organic contamination such as blood or aggressive leaves is promising with hydrogen peroxide.
Clean granite slabs properly
- Liquid-absorbing special agent
- Dishwashing detergents for machines
- Hydrogen peroxide
- Natural stone cleaning agent (pH neutral)
- Green or algae remover
- Rust remover
- Possibly icing spray
- Wire brush
- Hard bristle brush
- Soft cotton cloth
- Microfiber cloth
1. Maintenance cleaning
Mix the pH-neutral natural stone cleaner with lukewarm water according to the manufacturer's instructions. Always wipe the granite slabs when the shine disappears under individual dust spots.
2. Remove grease stains
To clean the granite slabs from greasy stains, oil and wax stains, apply a special moisture-absorbing paste or powder according to the manufacturer's instructions. Let it soak in, after the recommended amount of time, wipe off the agent and repeat the process several times.
3. Remove rust stains
Rust stains can form on granite slabs due to ore inclusions. The granite slabs can be cleaned with a granite rust remover. Apply the remover and, after the recommended exposure time, wipe it off with light pressure.
4th. Remove organic matter
Use hydrogen peroxide to clean the granite slabs from stains made of organic substances such as blood, mulch or acidic leaves such as oak or walnut. The product is sold as a bleach for hair and is available in pharmacies and hairdressers. Spread on the stains and wipe dry after ten to thirty minutes.
5. Remove solid matter
Solids such as chewing gum, glue or paint residue and stains that have dried on the granite slabs must be sprayed with icing spray until the consistency begins to crumble. You can pick up the fragile individual parts with a dry or slightly damp cloth.
6th. to brush
Granite slabs with unpolished surfaces can be processed with a scrubber, hard bristle brush or wire brush. Avoid getting too wet when brushing.Tips & Tricks When cleaning granite slabs, it is important to use water in a controlled manner. Basically, the porous granite absorbs all liquids. If there is too much cleaning water, this can lead to soiling and staining during cleaning.