Painting slate is a good idea?

Slate is also popular on roofs and facades because of its elegant natural look. In some cases, painting slate surfaces is still a desirable undertaking. The material is not a grateful object to paint. It is generally possible with special natural stone colors, but there is always a residual risk of insufficient hold.

Slate consists of changing substances

Before considering painting, it should be established beyond doubt whether the material is real slate. Imitations made from Eternit, for example, need completely different types and colors. If real slate is encountered, thorough cleaning and preparation can restore the appearance of a new stone.

  • Also read - Buy slate sheets in 20 × 20 cm
  • Also Read - Instructions for Cleaning Slate Sheets
  • Read also - How To Cut Slate Sheets

Basically, slate is a poor natural stone to be painted over. Its formation and classification is assigned to the border area between metamorphic rocks and sediments. This leads to a fluctuating density of the substance and different weighting of the ingredients. A color can only be applied evenly and permanently, if these properties are balanced and bridged.

Slate needs to be sealed

The basis for the aging of a layer of paint is "deep pore" cleaning, complete drying and a saturating primer. Put simply, a kind of insulating armor layer has to be established on the slate. So that we cover the most formative property of slate, the so-called foliation.

Theoretically, it is possible to "pour on" a generous amount of a film-forming coating, as is known from concrete surfaces (parking garage floors). Depending on the nature and pre-processing of the surface, this priming layer must also level any unevenness.

This is how paint (possibly) holds on to slate

1. Clean

Slate surfaces are best cleaned with a pressure washer and brushes.

2. let dry

Slate takes a long time to dry. Two to three days should be calculated in an environment with an outside temperature of around 25 degrees Celsius and moderate humidity (up to sixty percent).

3. Priming

Only primers suitable for natural stone from specialist dealers should be used according to the manufacturer's instructions. The common and common products from the hardware store are rarely suitable.

4th. To brush

Ideally, a natural stone paint from the same manufacturer as the primer is used.

Tips & Tricks With the professional preparation of the surfaces, you can create effects on slate that often exceed expectations in terms of visual attractiveness. Try out different options on test areas before you decide to paint.