Nail slate sheets for correct attachment

Special slate nails are often used to fix slate sheets. In contrast to the slate pins, these can be countersunk in the slate, resulting in a flat surface. The nails have special properties.

Slate nails for fastening slate sheets

Special cardboard nails are available in specialist shops. Slate nails, which are mainly used outdoors. They are mostly made of stainless steel or are hot-dip galvanized. You can recognize the nails from the outside by their relatively large head, which should be at least ten millimeters in diameter. The length of the pen or. The shaft should not be less than 32 millimeters. The nails are often also used in other areas, for example for fastening roofing felt (€ 16.48 at Amazon *) or other materials that are applied to the roof for sealing.

  • Also read - prices for slate panels at a glance
  • Also Read - How To Install Slate Sheets Correctly
  • Also Read - Tips On Buying Slate Sheets

What to look for when processing or. Attention should be paid to fastening the slate sheets

Slate is a natural material that consists of several layers and is generally considered to be very brittle. If handled incorrectly, for example if mechanical loads are too high, the material breaks out very quickly. When nailing slate sheets, you should also observe a few things so that the sheets are not damaged when they are fastened. This includes the following things:

  • Use only suitable nails for fastening the slate sheets. Please note the properties of the fasteners mentioned above.
  • The perforation or. Fastening should always be done from the bottom up (from the inside to the outside).
  • When fastening, make sure that the slates are not knocked through at overhangs.

What else you should know about slate and their characteristics

Slate is created in a long geological process. The natural material can therefore have a wide variety of properties, such as natural color differences or different surface structures. If you cover an entire area with slates, you should therefore only use slabs from a single occurrence, unless you consciously want to have a colored design with different types of slate. Also remember that the attachment or. Treatment of the panels during processing may vary depending on the occurrence. Nevertheless, it is an interesting natural material that has been used for a very long time and is durable, ecologically valuable and environmentally friendly.