Spray glue is available these days in convenient jars that can be used immediately with no further preparation. That makes this type of glue look very practical and straightforward. Once the spray adhesive has developed its full adhesive effect, in many cases it can only be removed with great difficulty.
Wall posters and puzzles
In principle, spray glue is very suitable for fixing finished puzzles, for example. However, the use of spray glue also means a really permanent connection between the individual parts. Once the puzzle pieces have been carefully fixed to a suitable surface with spray adhesive, they can hardly be taken apart later.
Photo wallpapers and wall posters can of course also be fixed to a wall with spray adhesive. However, if these are ever to be removed, the use of spray adhesive is not a really good idea. After all, peeling off would not only damage the wallpaper that is mostly present. The complete removal of the adhesive residue from a wall or wooden wall is also an extremely tedious undertaking.
Be careful with large adhesive surfaces such as a wall: alternatives to spray adhesive
In order to attach decorative elements such as posters and photo wallpapers to a wall, it is better to use alternatives instead of spray adhesive. A photo wallpaper can also be fixed with classic wallpaper paste, which is easier to remove later due to its water solubility. For posters, photos or postcards, on the other hand, there are special adhesive pads that in most cases can be removed without leaving a trace.
What means can spray adhesive be removed??
The answer to the question about the best means of removing spray adhesive depends on the material or the material. Surface structure and the type of spray adhesive used. If a specific solvent is listed for the ingredients on the packaging, this can also be used to remove the adhesive. In principle, the following means are conceivable for this:
- mechanically effective methods with which adhesive residues are rubbed off
- Water and hot steam
- Solvents such as mineral spirits, turpentine and acetone
- Nail polish remover (contains acetone)
- special adhesive remover
- Label cleaner
- Home remedies such as salt, oil, or toothpaste
Often, combinations such as a damp cloth in conjunction with an iron can also lead to success. The selection of the right method depends largely on the surface to be cleaned. So it can be completely unproblematic to simply sand off spray adhesive from a wooden wall. Some textiles can easily be cleaned from cooking oil, others keep unsightly stains in the fibers after such a procedure.
Remove spray adhesive from sensitive surfaces such as laminate
Of course, if it has landed spray adhesive on the laminate floor when crafting, it can not be easily sanded. Aggressive solvents could damage the ground permanently. Therefore, try to put a damp cloth on the appropriate spot and then ironed with a moderate hot iron on the towel. If you are lucky, the spray adhesive can be softened by the heat and can be easily wiped away with the damp cloth.
In a similar manner, a thicker layer of spray adhesive can also be scraped from walls when they first heat them with a hot air dryer. But you should pay attention to a sufficient fresh air supply, since while heating the adhesive, sometimes harmful substances could get into the air.
Remove spray adhesive from the skin
Often it is unavoidable that spray adhesive gets onto the skin during application. After all, many fine motor handicrafts can only be carried out poorly with protective gloves. Sometimes it can be helpful to dip your fingers in a bowl of prepared soapy water immediately after contact with the adhesive and rub them together.
If, on the other hand, the spray adhesive has already hardened, usually only mechanical or chemical methods help: If there is no cleaning paste for your hands, you can make such an "adhesive peeling" from ordinary salt and a little lukewarm water. It should be possible to "rub off " a large part of the adhesive in this way in several passes. Home remedies such as toothpaste and cooking oil can be just as effective.
Spray glue can also be removed from the hands with nail polish remover containing acetone. However, after this treatment, the hands should be washed thoroughly, dried and smeared with a nourishing skin cream.