drywall without ceiling connection

Basically there is the possibility of attaching a drywall to the ceiling. However, the drywall can also be installed without a ceiling connection. This is even preferable under certain conditions.

The various structural parts of a building move differently

Perhaps you have already heard that there are components on various structural parts of a building that come into contact with other structural elements with a construction joint. These joints cannot be rigidly jointed either, since the various construction parts move differently with respect to one another. Reasons for this include:

  • Also Read - Sample Calculation For The Cost Of A Drywall
  • Also read - screw drywall
  • Also Read - Tips For Building A Drywall With A Door
  • different thermal expansions
  • Load on certain components
  • Vibrations of various parts

This also applies to ceilings - the curvature of the ceiling

It is the same with blankets. That is why ceilings are also referred to as ceiling bending. If a drywall were to be screwed rigidly to the floor, the walls and the ceiling over the stud frame, it would only be a matter of time before there would be corresponding stress cracks in the drywall panels, which are then probably already filled and covered.

The sliding wall connection of a drywall

A specific procedure is described to prevent this. Before the upper end profile is installed, a rubber band is installed on the ceiling. This has a thickness of about one to two mm. This band comes between the ceiling and the profile. This type of transition to the ceiling is also known as a sliding ceiling connection.

On the one hand, the tape ensures that the upper profile is firmly in place and does not slip, on the other hand, the tension and vibrations of the ceiling are cushioned. You can obtain this tape as a sliding drywall ceiling finish together with all other components from specialist retailers.

Sliding ceiling connection also possible in a fire-proof design

Due to its importance in drywall construction, this sliding ceiling connection is often carried out. However, other requirements such as fire protection are also influenced by this. This is why this tape for the sliding ceiling connection is also available in a fire protection-proof version.

Tips & Tricks This tape is also suitable if you want to place a drywall on a screed, for example. You then place the tape under the soil profile. This is how sound vibrations are absorbed. This approach is particularly recommended if you want to mount a drywall on screed or even a floor covering contrary to the usual building standards. You can get the material for the sliding ceiling connection in a fire-proof version together with all other parts required for drywall construction from specialist dealers.

",